Saturday, August 15, 2009

In progress

I did some more work to the Geo today but it got dark before I thought about pictures. I made some fairings to keep the front tires out of the airflow as well as some panels to make the newly exposed rear look a little better. I also started on the rear wheel well skirts, got the top part done but I'm still deciding how I want to do the bottoms so they are easily removable for servicing.

I'm thinking about adding a Kammback and maybe some wiper deflectors into the mix too. And eventually I'll go fully smooth on the wheel covers but for now the ones I have are pretty smooth so not a big priority.

I've been getting 42 MPG for the last several tanks so I'm really curious to see what all these changes can do. As far as I can tell I'm already doing pretty good for an automatic trans car but this stuff is fun, much more fun than engine or paint and body work.

The back aeromod

I noticed a big chunk of the rear fascia hung down lower than anything else at the rear of the car so I decided to remove the factory air brake. I'll make some sheet metal covers to dress it up a little so it doesn't look quite so bad.
That separate piece in the first pic is what I cut off.


Friday, August 14, 2009

Front aeromods

The front end so far.
+++++++++++++++++++++++++++++++++++++++++++++++


Front air dam, partial grill block and filled hood/ bumper gap. I anticipate some good mileage gains from these modifications.


All the parts added this far are metal, mostly some old 5V tin roofing I had laying around from another project. There are a few pieces of 18 ga. galvanized but not much because it's harder to work with and complete overkill for these kind of modifications. Lots of pop rivets and a few screws holding it all together.


A hinged section I made in the center of the air dam because I like to be able to jack the front of the car up in the middle and my jack won't fit under the new addition.


Here you can see the jack just fits in the opening, there is a neo magnet on each side to keep the door closed. The magnets are mostly just there for cosmetic reasons so the door doesn't show when the car is sitting still, I'm sure air pressure would keep it closed at speed.

Still gotta do something to get those front tires out of the air stream.

Aero mods to the Metro-1

Finally started on the aerodynamic modifications to the Metro this week. First I removed the side mirrors and made some covers, this reduces frontal area as well as improving the vehicles Cd. In Florida the law requires one mirror capable of seeing 200 feet behind the vehicle so my inside mirror still satisfies that all by itself.



Sunday, May 24, 2009

More storage boxes part 2

Some storage boxes for a fence company to sort their various hardware they keep on hand.

Here's one of the boxes next to a plastic bin that it will replace.



The dividers are removable so the boxes can be configured for different uses.

Trailer re-model

This is a house trailer I've been working on for a friend of my moms. It really needs to be torn completely down to the frame for repairs but other people have also be working on it so I'm not sure what awfulness has been covered over already.



Some floor work at my friends house

Helped my friend put some laminate flooring in a couple of rooms of his house and tile in the bathroom. Didn't take any pics until it was almost over though.


The part in the lower half of the picture was already there and cut so we had to install a threshold, it isn't the way I'd like to do it but we had to work with what we had.